;
; Note. The first column below contains the actual printer command. The
; second contains the name of the font as this will be indicated in the
; font picklist within Kwik Text. The third contains the name of a file
; which is a character translation table to be used with the font in 
; question. Up to 128 bytes can be translated per font. The fourth column
; specifies whether a font is proportional or not. If you want proportional
; spacing and justification then this parameter must be set to one.
;
; As Dot Matrix Printers are hardly used any more this file does not 
; contain many possibilities for font variation. Users could however
; alter the file and insert commands for the fonts they would like to
; be able to activate on their printer. Make sure that the escape
; sequences are those which are legal (check your entries against those
; in the command reference section of the printer manual).
;
; ID of font	³  Name of font	     ³Transl. table	³Prop.?	³ Width of `a' 
;-----------------------------------------------------------------------------
;
!
H5-0W0   	³ Standard           ³			³0	³25
G		³ Bold               ³			³0	³25
4		³ Italic             ³			³0	³25
-1		³ Underline          ³			³0	³25
x0		³ Draft              ³			³0	³25
P		³ Pica (10) cpi)     ³			³0	³25
M		³ Elite (12 cpi)     ³			³0	³25
g		³ Condensed (15 cpi) ³			³0	³25
W1Gg		³ Enlarged           ³			³0	³25
!		³ 17 Chars. per Inch ³			³0	³25
!
	   	³ Standard           ³			³0	³25
!
		³ Standard           ³			³0	³25
!
		³ Standard           ³			³0	³25
!
		³ Standard           ³			³0	³25
!
		³ Standard           ³			³0	³25
!
		³ Standard           ³			³0	³25
;
; Small Font specifications:
;
!
	   	³ Standard           ³			³0	³25
!
		³ Standard           ³			³0	³25
!
		³ Standard           ³			³0	³25
!
		³ Standard           ³			³0	³25
!
		³ Standard           ³			³0	³25
!
		³ Standard           ³			³0	³25
;
; The following is a list of assignments. The fonts which are activated by
; Ctrl-1 through 4 while editing can be assigned to a font using the ID number
; in the laser printer. These option is not available on Dot Matrix Printers.
;
CTRL_1	!
	³ Standard           ³			³0	³25
CTRL_2	!
	³ Standard           ³			³0	³25
CTRL_3	!
	³ Standard           ³			³0	³25
CTRL_4	!
	³ Standard           ³			³0	³25
;
CTRL_5	UL	//	Underlining, must be assigned to Ctrl-5!
;                       Doesn't work with Dot Matrix Printers!
;
; How is an endnote number reference in text to be printed?
; Font is assigned here which is used on printing.
;
Ý	!
		(Enter Superscript command for your printer!)
;
; Number of points for basic font, e.g. 12 for Pica normal.
;
12
;
; Number of points for Small Font. Again Pica normal is assumed.
;
12
;
; Base font type: 0 = Times Roman; 1 = Helvetica; 2 = Letter Gothic
;
2
;
; End of File